close
GM TECH-2 Features:
* Authentic GM software in theTech-2Flash means the most comprehensive diagnostic software available for late model GM vehicles.
* Support for on-board diagnostics on all GM systems 1992 thru current year.
* Removable hardware modules provide insurance against scan tool obsolescence.
* Large, easy-to-read backlit screen.
* RS232 & RS485 ports provide the avenue to connect future devices to yourTech-2Flash.
* Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
* Ability to view the status of vehicle diagnostic tests as they run.
Bi-directional:
The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.
The authentic GM 1992-current year software will provide full bi-directional controls when performing power train, chassis, and body diagnosis.
Vetronix Tech-2 Specifications:
Dimensions
|
12" * 6" * 2"
|
Microprocessor
|
32 bit, 16 MHz
|
Memory
|
32 MB flash type II PCMCIA. Type III slot available for future expansion.
|
Communications
|
Integral RS232 communication port.
|
Screen
|
3.8"*2.8" backlit monochrome with full graphics capability: 320??240 pixels. Displays up to 9 vehicle parameters at once
|
GM Tech-2 Starter Kit with CANdi Module & TIS Kit includes :
* Tech-2 Flash Tester
* CAN diagnostic interface module(CANdi)
* 32 MB PCMCIA Card with GM OE Applications
Kit of the cables:
1) 3000095-DLC cable
2) 3000096-Cigarette lighter power cable
3) 3000097-Battery power cable
4) 3000098-SAE 16/19 pin adapter (OBD2)
5) 3000099- NAO 12/19 adapter
6) 3000109-DLC loopback adapter (selftest)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need theTech-2Flash and a CAN diagnostic interface module. The module connects between theTech-2Flash??s diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
The following GM vehicles utilize the CAN interface:
* 05 Buick Allure (3.6L)
* 05 Buick LaCrosse (3.6L)
* 05 Buick Rainier (5.3L)
* 04-05 Buick Rendezvous (3.6L)
* 04-05 Cadillac CTS (3.6L)
* 04-05 Cadillac SRX (3.6L / 4.6L)
* 04-05 Cadillac XLR (4.6L)
* 05 Cadillac STS (3.6L / 4.6L)
* 05 Chevrolet Cobalt (2.2L)
* 05 Chevrolet Corvette (6.0L)
* 05 Chevrolet Equinox (3.4L)
* 05 Chevrolet TrailBlazer (5.3L)
* 05 Chevrolet SSR (6.0L)
* 04 Chevrolet Malibu (Body/Chassis only)
* 05 Chevrolet Malibu (3.5L)
* 05 GMC Envoy (5.3L)
* 05 Pontiac G6 (3.5L)
* 05 Pontiac GTO (6.0L)
* 05 Pontiac Pursuit (2.2L)
* 05 Buick LaCrosse (3.6L)
* 05 Buick Rainier (5.3L)
* 04-05 Buick Rendezvous (3.6L)
* 04-05 Cadillac CTS (3.6L)
* 04-05 Cadillac SRX (3.6L / 4.6L)
* 04-05 Cadillac XLR (4.6L)
* 05 Cadillac STS (3.6L / 4.6L)
* 05 Chevrolet Cobalt (2.2L)
* 05 Chevrolet Corvette (6.0L)
* 05 Chevrolet Equinox (3.4L)
* 05 Chevrolet TrailBlazer (5.3L)
* 05 Chevrolet SSR (6.0L)
* 04 Chevrolet Malibu (Body/Chassis only)
* 05 Chevrolet Malibu (3.5L)
* 05 GMC Envoy (5.3L)
* 05 Pontiac G6 (3.5L)
* 05 Pontiac GTO (6.0L)
* 05 Pontiac Pursuit (2.2L)
全站熱搜
留言列表